+ Post New Thread
Results 1 to 3 of 3
  1. #1
    Advanced Member level 2
    Points: 3,764, Level: 14

    Join Date
    Apr 2010
    Location
    UK
    Posts
    547
    Helped
    91 / 91
    Points
    3,764
    Level
    14

    x86 board wanted or suggestions for suitable easybuild soc

    Hi

    I'm looking for a pre-built x86 board with the following rough specs:

    x86 - i3 ish level of processing inc Floating point (32 bit is fine)
    low power (board powered via USB)
    ram up to 64MB flash or rom for application on boot up.
    2x USB 1 for input other for output dedicated
    capable of running forth ideally or linux if I must
    programmable via windows7 or linux red hat
    I don't need any other interfaces etc.
    Board to be as small as possible - ideally no bigger
    than standard thumb drive size - but can be flexible on that.
    Ideally very low cost (whenever isnt it!)

    Everything I can find seems to be over specified for this
    use (eg. intel thumb systems - too big - too many ports/functions etc)

    Any recommendations welcome alternatively if no such thing
    exists can anyone recommend a good chipset for building
    such a system (I need to do it fairly quickly)

    If it runs forth I may be able to drop the x86 requirement.


    All ideas welcome
    thanks

  2. #2
    Advanced Member level 2
    Points: 3,764, Level: 14

    Join Date
    Apr 2010
    Location
    UK
    Posts
    547
    Helped
    91 / 91
    Points
    3,764
    Level
    14

    Re: x86 board wanted or suggestions for suitable easybuild soc

    Ok it seems nothing - anyone have a 'closest' suggestion?



  3. #3
    Newbie level 4
    Points: 57, Level: 1

    Join Date
    Sep 2016
    Posts
    5
    Helped
    0 / 0
    Points
    57
    Level
    1

    Re: x86 board wanted or suggestions for suitable easybuild soc

    ASUS J3455M-E is miniITX with i3 like performance Soc with 2 USB 2.0/ 2 USB 3.0.



--[[ ]]--