Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

[SOLVED] output common mode feedback of differential output amplifier

Status
Not open for further replies.

greenjuice

Member level 1
Joined
Aug 21, 2015
Messages
40
Helped
0
Reputation
0
Reaction score
0
Trophy points
6
Activity points
348
I'm making folded cascode amplfier and common mode feedback circuit to bias output level.

If i make output common mode level 1.75, then each my amplifier output is always almost 1.75v ,not average of two output level without changing my input voltage level.

is my structure not right?

i attach my circuit

Thank you.

https://obrazki.elektroda.pl/4856419500_1468469468.png
 
Last edited:

dear your question is not clear.
The schematic you attached is not readable also.
you can use bias in other way like using supply of op-amp and potentio at input.
 
Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top