Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

[SOLVED] (4nec2) errors what do they mean?

Status
Not open for further replies.
A

ateet101

Newbie level 6
Joined
Jun 8, 2015
Messages
11
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
98
I receive the following errors and I don't know what they mean. I am currently working with 512MHz, but I also want to complete frequency sweep of 30 - 512 MHz

Warn.: Wire 17 (tag 18), seg-len ( (0.109) ) above wlen/10 (0.059)
Error: Wire 18 (tag 19), seg-len ( (0.361) ) above wlen/5 (0.117)
Error: Wire 19 (tag 20), seg-len ( (0.361) ) above wlen/5 (0.117)
Error: Wire 19, seg 423 (tag 20), seg-len (0.361) differs more than 5 * seg-len (0.069) for wire 2
Error: Wire 20 (tag 21), seg-len ( (0.361) ) above wlen/5 (0.117)

What is "seg-len"? I know wlen/5 is 300/512 = .5859meters/5 = .117

How can I choose the correct segment length? I am building a discone antenna

Thanks
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top