Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Roughly calculating efficiency of transmitter.

Status
Not open for further replies.
neazoi

neazoi

Advanced Member level 6
Joined
Jan 5, 2008
Messages
4,122
Helped
13
Reputation
26
Reaction score
15
Trophy points
1,318
Location
Greece
Activity points
36,951
Hi again, how can I calculate the efficiency of a transmitter?

I would like to know if my thinking is correct by a simple example:

Assumming that a transmitter outputs 4W of RF power at 50R and consumes 290mA at 22V.
Then for 4W output, the transmitter consumes P= 22v * 0.290A = 6.38W

so, at 6.38W of consumtion, 4W is outputed.
bringing that to % percentage, it is (100*4)/6.88 = 62.69

This means that the transmitter is 62.69% efficient.

Am I right?
 

Yes, you are right. If the 4W is the peak power, then the number is peak efficiency. If 4W is average power, then the number you have got is average efficiency.

If you are characterizing Power Amplifier, you may need to quote its Power Added Efficiency (PAE).
 

62.7 % Efficiency, that is very high unless its a class C. From memory, max eff of class B = 78%, allowing a PI tank circuit with a loss of 10 % ( Qunloaded = 100, Q loaded = 10) gives 71%, so you reasonabley close to the theoretical maximum.
Frank
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top