Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Single Stub matching

Status
Not open for further replies.
B

baby_1

Advanced Member level 1
Joined
Dec 3, 2010
Messages
415
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,298
Activity points
4,277
Hello
As you see this problem with single stub matching
2390138400_1435297056.jpg

I matched zl=.5+1.5i to a normalized line (Z0=50)(I did it with smith chart and analytically) but as you see in the second picture as I calculate Zin it doesn't get me the same result (.5+1.5j).
what is my wrong?
 

Hello
Yes I did
 

The impedance of the shorted stub reduces to z_in = j*tan(2*pi*1.68) = j2.13.

The input impedance of the load as viewed from the stub is z_in = ((0.5+j1.5) + j(50Ω)*tan(2*pi*0.28))/((50Ω) + j(0.5+j1.5)*tan(2*pi*0.28)) = 0.21 - j4.49.

The two in parallel don't give 1... am I missing something?
 

I am a little confused. Why do you keep handwriting "Yin = Zin"? Yin is of course 1/Zin

and in computing the impedance where the stub joins the main line, the ADMITTANCES add, not the impedances. You want normalized Yin total to equal 1 at that point.
 
  • Like
Reactions: baby_1

    B

    baby_1

    Points: 2
    Helpful Answer Positive Rating
Hello dear biff44
"Yin=Zin" it means that if we find normalized Zin=1 then Yin=1/Zin=1.
Thanks for your response
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top