Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

[AVR] error while programming atmega8a in avrdude

Status
Not open for further replies.
D

Deexith Hasan

Advanced Member level 4
Joined
Oct 24, 2014
Messages
111
Helped
4
Reputation
8
Reaction score
3
Trophy points
18
Activity points
740
C:\Users\ADMIN>avrdude -p atmega8 -P com11 -c arduino -U flash:w:main.hex

avrdude: AVR device initialized and ready to accept instructions

Reading | ################################################## | 100% 0.02s

avrdude: Device signature = 0x1e950f
avrdude: Expected signature for ATMEGA8 is 1E 93 07
Double check chip, or use -F to override this check.

avrdude done. Thank you.
 

Hi,

What's your question?

Klaus
 

i just need to program atmega8a, i dont have programmer but have arduino and configured it as arduino isp and made connections with atmega8 and programmed using avrdude..


but got error..
C:\Users\ADMIN>avrdude -p atmega8 -P com11 -c arduino -U flash:w:main.hex

avrdude: AVR device initialized and ready to accept instructions

Reading | ################################################## | 100% 0.02s

avrdude: Device signature = 0x1e950f
avrdude: Expected signature for ATMEGA8 is 1E 93 07
Double check chip, or use -F to override this check.

avrdude done. Thank you.




is there any other way to program atmega8a...
 

Hi,

Double check chip, or use -F to override this check.
Click to expand...

did you test the "-F" option?

Klaus
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top