Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Standard Low voltage DC bus voltage for solar panel outputs?

Status
Not open for further replies.
T

treez

Guest
Hello,
What is the accepted standard commercial & industrial voltage bus level for solar panel outputs?

Is it 12V or 24V, or something else?

(That is, considering that that an 220VAC inverter is not used.)
 

48V is the standard low voltage for kW sized arrays, but there is nothing stop Utilites from cascading banks of arrays into larger serial, Parallel grids for MW and GW sized farms with suitable protection.
 
  • Like
Reactions: treez

    T

    Points: 2
    Helpful Answer Positive Rating
Thanks, i was also thinking about low voltage bus's for use in offices...for their laptops and led lights etc...which might be less than KW's...i think these may be 24v because its below the "startle" level?
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top