Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

how to define "when" statement with bus pins in state dependent timing arc?

Status
Not open for further replies.

zhoulin999

Newbie level 5
Joined
Dec 17, 2005
Messages
8
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,340
Code:
bus(rom_nodummy_rden_dly) {
      bus_type : bus_2_1_0 ;
      direction : input ;
    }

    pin(rom_nodummy_rden_dly[1:0]) {
      capacitance : 0.05 ;
      direction : input ;
      fall_capacitance : 0.01 ;
      fall_capacitance_range(0.008, 0.1);
      max_transition : 1.8 ;
      rise_capacitance : 0.01 ;
      rise_capacitance_range(0.008, 0.1);
    }

    pin(in) {
      capacitance : 0.04 ;
      direction : input ;
      fall_capacitance : 0.04 ;
      fall_capacitance_range(0.04, 0.041);
      max_transition : 1.8 ;
      rise_capacitance : 0.04 ;
      rise_capacitance_range(0.04, 0.042);
    }

    pin(out) {
      direction : output ;
      function : "in" ;
      max_capacitance : 0.0360106 ;
      max_transition : 1.8 ;

      timing() {
        related_pin : "in" ;
        timing_sense : positive_unate ;
        when : "!rom_nodummy_rden_dly[1] & !rom_nodummy_rden_dly[0]";
        sdf_cond : "rom_nodummy_rden_dly == 2'h0";

How to write the second line from bottom in above example?
 
Last edited by a moderator:

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top