Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

A question of carrier of subthreshold NMOS device

Status
Not open for further replies.
B

bhl777

Full Member level 6
Joined
Sep 30, 2008
Messages
363
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,296
Activity points
5,140
Hi All, if I have a floating gate NMOS device, biased by a specific current, and its Vgs is less than Vth. How can I determine the carrier of this NMOS device? Is it electron or hole? Thank you!
floating gate NMOS.jpg
 

That would want some more details on just how far below
VTH. In weak inversion, it's still inversion and channel
carriers will be source species. In depletion you may still
see some state- or trap-hopping / tunneling transport.
But I question altogether the validity of saying a FET
will be biased by an arbitrary current and an unknown
(other than very crudely) Vgs.

Now if Vgs "<<" VTH, I'd say the channel is gone and
surface will be near body doping (or even accumulated)
and carriers would then be holes, but there's a continuuum
there. Holes, to nothing but traps, to electrons as the
Vgs goes from below to above.
 
  • Like
Reactions: bhl777

    B

    bhl777

    Points: 2
    Helpful Answer Positive Rating
Charge carriers in a conducting NMOS are electrons, independent of its operating mode (weak or strong inversion).
 
  • Like
Reactions: bhl777

    B

    bhl777

    Points: 2
    Helpful Answer Positive Rating
Hi erikl, for NPN devices (BJT/HBT), when Vbe>0,are electrons also the carriers, no matter what Vce is?
 

And what about BJTs?

BJTs' operation involves both electrons and holes, s. here.
... most of the BJT collector current is due to the flow of charges injected from a high-concentration emitter into the base where they are minority carriers that diffuse toward the collector, and so BJTs are classified as minority-carrier devices.
Click to expand...
 
  • Like
Reactions: bhl777

    B

    bhl777

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top