Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

EI laminated iron core transformers...

Status
Not open for further replies.
Externet

Externet

Advanced Member level 2
Joined
Jan 29, 2004
Messages
579
Helped
28
Reputation
58
Reaction score
29
Trophy points
1,308
Location
Mideast US
Activity points
5,665
Most power tranformer for mains have the EI core, interlaced for better efficiency and solidity.
A non-interlaced EI core also works. Air gap between laminations is kept to minimal in its assembly.

What are the effects of slightly increasing the air gap between core sections ?

What changes are to expect in the voltage, current, heating, power capability of such transformer with an implemented adjustable air gap, in idling and full rated conditions ?
 

Increased magnetizing current, with respective high air gap the magneitzing current would cause additional losses.

Noone would do this intentionally.
 

The air gap also reduces the input current when the output is loaded due to the large leakage inductance appearing in series with the primary. Its a technique used in cheap welding transformers and also "bell" transformers.
Frank
 

An air gap doesn't increase the leakage inductance, or if it does only slighty. As a rule of thumb the leakage inductance of a transformer equals the leakage inductance of the air core transformer, thus isn't modified by the air gap.

Welding tranformers and similar designs with artificially increased leakage inductance, e.g. magnetron power supplies, have a magnetical bypass (mechanical variable in case of the welding transformer).
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top