Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

INTEL DG31GL motherboard no display.

Status
Not open for further replies.

gyanuloving

Newbie level 3
Joined
Jan 6, 2015
Messages
4
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
23
I have same problem . no display in INTEL DG31GL BOARD. so please tell me what i do.
i check voltage at dimm ram slot .
pin 1 - .9V (ddr2 ram)
and vcc volt at pin - 67 1.8V
and data and clk at pin no. 119 and 120 - 3.5V

post card show code 0000 with high rst
 

I have same problem . no display in INTEL DG31GL BOARD. so please tell me what i do.
i check voltage at dimm ram slot .

Can you give some more details on what exactly is happening?
 

When I power on then no dispaly on board while ram and ram volt ok. and cpu proper heat.
post card (diagnostic or debug card) show 0000 with high rst.
 

Have you checked whether graphics driver has been installed on the motherboard?
 

Have you checked whether graphics driver has been installed on the motherboard?

graphic driver may be effected when some display or bios screen appear. but here nothing on screen.
 

check GMCH ICH input power check vrm is good vrm power good signal
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top