+ Post New Thread
Results 1 to 2 of 2
  1. #1
    Newbie level 4
    Points: 780, Level: 6

    Join Date
    Aug 2010
    Location
    Pune
    Posts
    6
    Helped
    0 / 0
    Points
    780
    Level
    6

    [Moved] problem in 12v to 230v inverter

    hello,
    i have made an inverter using cd4047 as per the circuit diagram i have uploaded here.. as per the circuit diagram gate pulse are given to the mosfet from pin 10 and pin 11 of the IC . but when i apply 12v to the ic i am getting 12v at pin 10 but not getting any voltage at pin 11 but i am getting 12v from pin 13 so i have connected 100ohm resistor to pin13 . but still i am not getting output from the transformer. i am using a 12-0-12v to 230v center tapped 1.5amp transformer. please tell me where is the fault in my circuit?

    •   AltAdvertisment

        
       

  2. #2
    Super Moderator
    Points: 49,868, Level: 54

    Join Date
    Apr 2011
    Location
    Minneapolis, Minnesota, USA
    Posts
    12,307
    Helped
    2431 / 2431
    Points
    49,868
    Level
    54

    Re: [Moved] problem in 12v to 230v inverter

    Sorry, no diagram can be seen in your post.



--[[ ]]--