Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

[SOLVED] orientation propert in SOC encounter

Status
Not open for further replies.
V

vahey

Newbie level 3
Joined
Dec 25, 2013
Messages
4
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
23
Hi All,

I need to report std cell orientation in my design, but can't find the way to do it.

Does someone know what command to use to get it .

Thank You in advance.

VaheY
 

when you export the DEF file, there is a section called "COMPONEN" which included all std-cell, pads, memories.., position and orientation.
 
  • Like
Reactions: vahey

    V

    vahey

    Points: 2
    Helpful Answer Positive Rating
HI rca,

Thanks for feedback.

So does it mean that there is no such command to get orientations in opened design, something like "get_property" command ?

Thanks,
VaheY
 

No you could with get_property but if you want to have access to all std cell, I imagine exporting the def is the fastest way.
 
  • Like
Reactions: vahey

    V

    vahey

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top