Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Bosch CCD Camera flickering Problem

Status
Not open for further replies.
S

shb264

Member level 1
Joined
Oct 19, 2013
Messages
37
Helped
0
Reputation
0
Reaction score
0
Trophy points
6
Activity points
240
I have a Bosch CCD camera installed on the home security through DVR. The camera is installed outside to monitor the in and out of the main entrance. The camera started flickering (display on LCD appears and disappears periodically). What can be the reason for this and how I can rectify that. Is there any possibility that moisture (rainy season) or too much light (day time in summers) can be causing some problem with the sensor?
 

I think there might be a mismatch between the refresh rate(measured in frames per second) of the camera and refresh rate of the LCD monitor.
Is there any possibility that moisture (rainy season) or too much light (day time in summers) can be causing some problem with the sensor?
Click to expand...
This also might be possible.Check the CCD sensor to know whether is there any moisture on the screen or not.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top