Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

BeagleBone Black no HDMI

Status
Not open for further replies.
D

Dhanushka Jayaweera

Junior Member level 1
Joined
Feb 15, 2014
Messages
18
Helped
1
Reputation
2
Reaction score
1
Trophy points
3
Activity points
123
hey guys,

Is it possible for a PSU to interfere BBB's HDMI output? (If PSU generates noise)
 

well, I'm using a car batter to power up a monitor (230V) and a BBB at the same time.
BBB is powered through a LM2596 switch mode regulator. (12V -> 5V)
Monitor through a 100W inverter. (12V -> 230V)

It seems like BBB cannot generate a video output when both share the same battery. :(
 

Yes, the beagle is really boring in terms of external connections of anything.
I do not know LM2596 .. but I took a look at the datasheet.
I recommend you make an adjustable supply with lm317 +2 N3055. I made a recently, and is able to feed beagleBoneBlack cape + 4.3 ".
I hope this helps.;-)
 
well, I have LM2596 regulators already. So, isn't there a method to filter whatever the noise before powering up the regulator?
 

Yes, you can do that too .. what is the input voltage to the regulator?
I think the problem with Beagle is caused by using the power supply used it to power other circuits. Are you doing it?
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top