Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

I am blocked from a website

Status
Not open for further replies.

anhnha

Full Member level 6
Joined
Mar 8, 2012
Messages
322
Helped
4
Reputation
8
Reaction score
4
Trophy points
1,298
Activity points
3,684
Hi.

I have been blocked from www.facebook.com for a week. Actually, I don't know why. When I type the address in the address bar of Google Chrome, nothing happen. The site doesn't load any more. And no warning pops up.

I remember that I used a software or plugin or something else to block the site. However, when I check all software and plugins and there is no one that I think blocked the site.
I hope you can help me out.
I also try other browsers like Firefox and Internet Explorer and all of them show the same result.
Here is the result when I type ping and tracert.

Reply from 31.13.79.7: bytes=32 time=85ms TTL=87
Reply from 31.13.79.7: bytes=32 time=69ms TTL=87
Reply from 31.13.79.7: bytes=32 time=69ms TTL=87

Ping statistics for 31.13.79.7:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 69ms, Maximum = 85ms, Average = 75ms

C:\Users\Huan>tracert www.facebook.com

Tracing route to www.facebook.com [31.13.79.7]
over a maximum of 30 hops:

1 18 ms 5 ms 8 ms 192.168.0.1
2 13 ms 7 ms 21 ms 118.70.0.203
3 13 ms 14 ms 7 ms 118.70.0.41
4 * 40 ms 45 ms 118.69.184.145
5 41 ms 26 ms 32 ms 183.80.132.138
6 110 ms 88 ms 89 ms 203.116.9.129
7 88 ms 89 ms 91 ms 203.117.36.45
8 91 ms 89 ms 97 ms 203.117.36.26
9 83 ms 149 ms 72 ms xe-0-2-0.pr01.sin1.tfbnw.net [74.119.79.38]
10 71 ms 70 ms 90 ms po126.msw01.03.sin1.tfbnw.net [31.13.30.245]
11 76 ms 73 ms 70 ms facebook.com [31.13.79.7]

Trace complete.
 

Have you checked your host file?
 

Yes, it is OK.

- - - Updated - - -

Thank you. The problem is solved.I reset the host file and it works like a charm!
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top