Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Current Transformer Design for AVR based Ammeter.

Status
Not open for further replies.
imranahmed

imranahmed

Advanced Member level 3
Joined
Dec 4, 2011
Messages
817
Helped
3
Reputation
6
Reaction score
3
Trophy points
1,298
Location
Karachi,Pakistan
Activity points
6,492
Please let me know that I want to make current transformer with AVR based Ammeter,

but problem is that in market the CT`s are large size for 150/5A but I need CT of size

1 inch only.Another thing is to know that iron core is more flux attractive or ferrite core?
 

imranahmed said:
...Another thing is to know that iron core is more flux attractive or ferrite core?
Click to expand...

Selection of core material depends on range of signal frequency. If applied on low frequency ( mains, audio ) the best choice is iron, but above some KHz ( particularly on power switching ) ferrite becomes best suitable.


+++
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top