Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Is wave and heat equation with zero boundary a Poisson Equation?

Status
Not open for further replies.

Alan0354

Full Member level 4
Joined
Sep 6, 2011
Messages
214
Helped
30
Reputation
60
Reaction score
29
Trophy points
1,308
Activity points
2,709
I have two questions:
(1)As the tittle, if \[u(a,\theta,t)=0\], is

\[\frac{\partial{u}}{\partial {t}}=\frac{\partial^2{u}}{\partial {r}^2}+\frac{1}{r}\frac{\partial{u}}{\partial {r}}+\frac{1}{r^2}\frac{\partial^2{u}}{\partial {\theta}^2}\]

and

\[\frac{\partial^2{u}}{\partial {t}^2}=\frac{\partial^2{u}}{\partial {r}^2} +\frac{1}{r} \frac{\partial{u}}{\partial {r}}+\frac{1}{r^2}\frac{\partial^2{u}}{\partial {\theta}^2}\]

Just Poisson Equation \[\nabla^2u=h(r,\theta,t)\] Where

\[ h(r,\theta,t)=\frac{\partial{u}}{\partial {t}}\]

or \[\;h(r,\theta,t)=\frac{\partial^2{u}}{\partial {t}^2}\] respectively.


(2)AND if \[u(a,\theta,t)=f(r,\theta,t)\], then we have to use superposition of Poisson with zero boundary plus Dirichlet with \[u(a,\theta,t)=f(r,\theta,t)\]?

That is

\[ u(r,\theta,t)=u_1+u_2\]

where

\[\nabla^2u_1=h(r,\theta,t)\] with \[\;u(a,\theta,t)=0\]

and

\[\nabla^2u_2=0\] with \[u(a,\theta,t)=f(r,\theta,t)\]

Thanks
 

Alan,



This question presumably was answered on link bellow.
Please tag the topic here as SOLVED if this explains what you need.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top