Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How long the charge time is fine，used in HBM of ESD？

Status
Not open for further replies.
J

july2424898

Newbie level 6
Joined
Oct 12, 2013
Messages
13
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
67
Charge time 1u
Discharge time 1u
Total time 2u
（Unit：second）
Is that ok？
I couldn”t find the standard of HBM.
 

The charge time is up to you (i.e. to your test bench). Discharge time constant for the HBM is standardized (but not the initial voltage!), s. this posting!
 
Hi Erikl，I am trying to simulate TLP（transmission line pulse） model，could you give me some advices？
tlp.jpg
How to set the transmission line parameter，like delay time、electric length？
How to define the charging time and discharging time？
 

Not my field, sorry!

Don't hijack your own thread for a different question. Better open a new thread with a new title for your problem!
 

You can use below for HBM simulation.
R0=1.5Kohm, C0=100pf, L0=7.4uH?? 2.jpg
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top