Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Needs Public TCP Server to which i can send data and monitor data??

Status
Not open for further replies.
xpress_embedo

xpress_embedo

Advanced Member level 4
Joined
Jul 5, 2011
Messages
1,154
Helped
161
Reputation
396
Reaction score
189
Trophy points
1,353
Location
India
Activity points
10,591
Hello!!!

I am using SIM900A Modem to send data over TCP Server at a particular port.

I am using HW Hercules Software to receive data from the GPRS Modem

Hercules.JPG

But to receive data i need a computer on Pubic Network, as i am in office and all computers here are on Private Network, so i can't receive data from GPRS.

But when i connect Data Card to my PC, which makes my PC as Public Server, i am receiving data properly.

So i want to know is there any method to receive data on Private Network, or there are any online sites which can be used to receive data from my gprs modem.
 

Can your computer connect to internet ?

If yes, you can setup NAT port in your modem, go to address 192.168.1.1, and config to forward port to your computer.

If not, you can not receive data from GSM module.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top