+ Post New Thread
Page 1 of 3 1 2 3 LastLast
Results 1 to 20 of 49
  1. #1
    Member level 3
    Points: 2,131, Level: 10

    Join Date
    Jan 2002
    Posts
    58
    Helped
    0 / 0
    Points
    2,131
    Level
    10

    Which protocol to use for sending SMS using PLC?

    Looking for specifications or tutorial about the protocol used to send SMS.
    The aim is using a PLC connected to a standard modem to send alarms.

    I think it s the TAP protocol but I haven't find anything really interesting
    about it.

  2. #2
    Member level 2
    Points: 2,562, Level: 11

    Join Date
    May 2001
    Posts
    52
    Helped
    2 / 2
    Points
    2,562
    Level
    11

    sms protocol

    What's SMS ???



    •   AltAdvertisement

        
       

  3. #3
    Full Member level 5
    Points: 3,682, Level: 14

    Join Date
    May 2001
    Posts
    251
    Helped
    15 / 15
    Points
    3,682
    Level
    14

    pstn sms protocol

    hi .. you should read your modem manual.
    there are at commands to send sms but they slightly differ from modem to modem. i can send you some docs abt wavecom and ericsson modems if interested.

    regards

    cancel



  4. #4
    Junior Member level 3
    Points: 3,183, Level: 13

    Join Date
    Jul 2002
    Posts
    28
    Helped
    1 / 1
    Points
    3,183
    Level
    13

    bmg protocol

    Use AT commands?



  5. #5
    Member level 3
    Points: 2,131, Level: 10

    Join Date
    Jan 2002
    Posts
    58
    Helped
    0 / 0
    Points
    2,131
    Level
    10

    firefox sms protocol

    Not really : using SMS messages require more than simple AT commands. Those commands just manage the parameters of the modem and the dialing procedure.

    There s a protocol used to send the message to the local phone company which will redirect the message to the target GSM.
    It's the description of that protocol which would be interesting for me



  6. #6
    Full Member level 5
    Points: 3,682, Level: 14

    Join Date
    May 2001
    Posts
    251
    Helped
    15 / 15
    Points
    3,682
    Level
    14

    ota, sms, tutorial, protocol

    hi .. i do no know exactly what you mean. I cans send sms from may gsm modem to other gsm phone via at command. You have to send AT command with PDU which is 7bit encoded sms. Other possibility is to inerract with sms centre via BMG protocol. Unfortuntelly BMG protocol need client on the other side and gsm operator will charge it for you.

    regards

    cancel



  7. #7
    Member level 3
    Points: 2,131, Level: 10

    Join Date
    Jan 2002
    Posts
    58
    Helped
    0 / 0
    Points
    2,131
    Level
    10

    smpp pdu building vb.net

    Quote Originally Posted by nukhung
    What's SMS ???

    Short Message Service (SMS) is the transmission of short text messages to and from a mobile phone, fax machine and/or IP address. Messages must be no longer than 160 alpha-numeric characters and contain no images or graphics.

    Once a message is sent, it is received by a Short Message Service Center (SMSC), which must then get it to the appropriate mobile device.


    To do this, the SMSC sends a SMS Request to the home location register (HLR) to find the roaming customer. Once the HLR receives the request, it will respond to the SMSC with the subscriber's status: 1) inactive or active 2) where subscriber is roaming.


    If the response is "inactive", then the SMSC will hold onto the message for a period of time. When the subscriber accesses his device, the HLR sends a SMS Notification to the SMSC, and the SMSC will attempt delivery.


    The SMSC transfers the message in a Short Message Delivery Point to Point format to the serving system. The system pages the device, and if it responds, the message gets delivered.


    The SMSC receives verification that the message was received by the end user, then categorizes the message as "sent" and will not attempt to send again.



  8. #8
    Full Member level 5
    Points: 3,682, Level: 14

    Join Date
    May 2001
    Posts
    251
    Helped
    15 / 15
    Points
    3,682
    Level
    14

    sms protocol commands

    look here .. maybe some other infos ...
    http://www.elektroda.pl/eboard/viewt...&highlight=gsm



  9. #9
    Member level 3
    Points: 3,717, Level: 14

    Join Date
    Mar 2002
    Location
    right here ... right now ...
    Posts
    58
    Helped
    3 / 3
    Points
    3,717
    Level
    14

    sms pdu format cdma

    althought u dont want to use gsm-phones i post this for the users who r looking for this ... information about TAP and UCP will follow
    The AT-commands for Mobile Equipment(ME) are defined in GSM 07.05 & GSM 07.07 available on www.etsi.org for free

    also have a look @ this topic:
    http://www.elektroda.pl/eboard/viewtopic.php?t=30778

    here they are:



    •   AltAdvertisement

        
       

  10. #10
    Member level 3
    Points: 3,717, Level: 14

    Join Date
    Mar 2002
    Location
    right here ... right now ...
    Posts
    58
    Helped
    3 / 3
    Points
    3,717
    Level
    14

    interface cdma modems to microcontroller

    3 types of sending sms messages are popular ..
    using either ucp or tap for connection to the smsc via modem
    or using at+c commands for ME (as posted before)

    tap and ucp are also used for pager messages...
    the tap specification was availabe on www.pcai.com but isnt anymore ... so i'll attach it.
    useful links:
    http://www.tap-ixo.info/
    theres a huge directory of tap phone numbers here :
    http://www.notepager.net/tap-phone-numbers.htm



    •   AltAdvertisement

        
       

  11. #11
    Member level 3
    Points: 2,131, Level: 10

    Join Date
    Jan 2002
    Posts
    58
    Helped
    0 / 0
    Points
    2,131
    Level
    10

    smsc ucp protocol microcontroller

    Wow you posted all that I needed.
    that right AT commands are also usable to do it by gsm modems.
    some interesting infos about it on the products manuals of Westermo

    thank you cancel and dsp_



  12. #12
    Member level 2
    Points: 2,578, Level: 11
    monty_burns_007's Avatar
    Join Date
    Jun 2001
    Location
    Springfield
    Posts
    46
    Helped
    5 / 5
    Points
    2,578
    Level
    11

    sms protocol nr

    Hi sklux and others,

    I am also looking for a manual or some info about sending SMS with a PLC with a normal STANDARD modem NOT GSM modems. There are software programs witch do this over PC and normal PSTN modem line. But I think there's a hard "secret" protocol behind.
    So the purpose is to send SMS without a GSM, but with a serial modem (normal telephone line) these modems don't have the SMS AT subset, so it has to be something different ?
    And sklux, i do have a normal dial-up westermo modem.

    Monty 8)

    PS: i want to link S5 and S7 siemens PLC's with SMS alarming



  13. #13
    Newbie level 2
    Points: 2,134, Level: 10

    Join Date
    Jul 2002
    Posts
    2
    Helped
    0 / 0
    Points
    2,134
    Level
    10

    how sms protocol looks

    Hi
    may be this reference will be useful
    http://www.riccibitti.com/tinyplanet/tiny_intro.htm



  14. #14
    Newbie level 2
    Points: 2,134, Level: 10

    Join Date
    Jul 2002
    Posts
    2
    Helped
    0 / 0
    Points
    2,134
    Level
    10

    wavecom mms protocol

    Hi
    this reference will be useful too
    http://www.riccibitti.com/tinyplanet/tiny_article.htm



  15. #15
    Member level 2
    Points: 2,302, Level: 11

    Join Date
    Mar 2002
    Posts
    49
    Helped
    0 / 0
    Points
    2,302
    Level
    11

    siemens sms protocol

    There are some ActiveX/COM components usefull for sending/recieving SMS and performing another task on the cellphone:

    http://www.programmersheaven.com/zone15/mh77.htm



  16. #16
    Full Member level 3
    Points: 3,390, Level: 13

    Join Date
    Dec 2001
    Location
    Just behind You ;-)
    Posts
    187
    Helped
    9 / 9
    Points
    3,390
    Level
    13

    microcontroller ucp sms

    Hi there,

    Have a look on this file, you will find all what you need.

    Hope this is helpful enough.

    Yours,



    •   AltAdvertisement

        
       

  17. #17
    Member level 5
    Points: 2,458, Level: 11

    Join Date
    May 2001
    Posts
    87
    Helped
    0 / 0
    Points
    2,458
    Level
    11

    sms pdu sequence in cdma

    is it possible to send sms messages using the phone and dtmf codes? like in the old pagers???

    regards,

    2000



  18. #18
    Member level 1
    Points: 3,126, Level: 13

    Join Date
    Oct 2001
    Posts
    40
    Helped
    0 / 0
    Points
    3,126
    Level
    13

    samsung ota bitmap

    HI,

    Here is datasheet for Siemens T20 GSM modem. There is list of all AT commands you need for using SMS.

    I was working on project where 8051 application was sending measured data thru the modem to server. data was sent everytim when server requested to do so. The manual contains standard AT command which should be compatible wih other modesm.

    Enjoy

    Lm



  19. #19
    Member level 1
    Points: 3,126, Level: 13

    Join Date
    Oct 2001
    Posts
    40
    Helped
    0 / 0
    Points
    3,126
    Level
    13

    sms-protocol nokia

    I'm sorry,

    the previous one is for falcom modems
    Here is the right one.

    U can find GSM (SMS) related stuff on

    www.etsi.org

    Lm



  20. #20
    Member level 2
    Points: 2,578, Level: 11
    monty_burns_007's Avatar
    Join Date
    Jun 2001
    Location
    Springfield
    Posts
    46
    Helped
    5 / 5
    Points
    2,578
    Level
    11

    sms+protocol

    I 've figured it out.

    Now i'm able to send sms messages from almost every serial device.
    So also including a PLC (ex. S7) with a normal PSTN modem :)
    You can dial a SMTP central (it's a GSM number) with a normal PSTN modem. Then when the connection is made you just send some coded stuff onto this serial connection and you're done.
    Well the coded stuff is UCP. I've figured out 2 commands:

    01 : send SMS
    30 : send SMS + extra stuff (like delayed delivery,...)

    Does anyone have a detailed documentation or ebook about the UCP commands and it's parameters ?

    I noticed some provider specific parameter in command nr. 01:

    ex. : 01/00360/O/01/0475332211//proximus/3/

    proximus is my GSM provider, what's the use of that parameter ? Does anyone have a description of all parameters for command 01 ? and 30 ?

    Thx...

    Monty 8)



--[[ ]]--