Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How can I create rounded PCB on altium ?

Status
Not open for further replies.
B

bianchi77

Advanced Member level 4
Joined
Jun 11, 2009
Messages
1,313
Helped
21
Reputation
44
Reaction score
20
Trophy points
1,318
Location
California
Activity points
9,442
Guys,
How can I create rounded PCB on altium ?
Any infos or links will be appreciated,

Thanks
 

The layer used to delimit PCB bounds is commonly the MECHANICAL 4.
If you draw a circle with this layer, should be enought.


+++
 

the external mechanical layer defines where the board will be cut by the machine, give it the shape you desire..
you can view that in 3D later on
 

It is possbile to generate line on any layer (for example keep-out layer or slik layer) from 3D model? There is tool in Design -> Board Shape -> Define from 3D body, but I need line on one layer to generate correct gerber file. In my case I need board cutted off like this; **broken link removed** Manual drawing isn't the option because of irregular shapes.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top