Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

IC for isolated power supply

Status
Not open for further replies.

tantudaisu

Member level 3
Joined
Nov 18, 2010
Messages
56
Helped
8
Reputation
16
Reaction score
7
Trophy points
1,288
Activity points
1,615
Witch ICS are most popular in commercial use SMPS?

I need a DC/DC, 48V/48V (~30W) isolated power supply (flyback topology).

- tantudaisu -
 

I'm looking for a chip, not for a software.

- - - Updated - - -

I think UC3843B is quite popular...
 

I've been using these nice modules from Traco in my last designs.

**broken link removed**

They offer good isolation, low parts count and is not so expensive. Take a look.
 

Witch ICS are most popular in commercial use SMPS?

I need a DC/DC, 48V/48V (~30W) isolated power supply (flyback topology).

- tantudaisu -

For flyback topology, the UC384X series of controllers (UC3842, UC3843, UC3844, UC3845) is super popular. There are also other popular controllers such as MC34063. And then, based on such controllers, many more enhanced controller are also available, such as LT1241, for example.

Hope this helps.
Tahmid.
 

Witch ICS are most popular in commercial use SMPS?

I need a DC/DC, 48V/48V (~30W) isolated power supply (flyback topology).

- tantudaisu -

Please Give me the input specification i will give you the complete design.

What i mean to say that, Please tell me the input voltage.
If you need design for 48V to 48V why you need the design.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top