+ Post New Thread
Results 1 to 2 of 2
  1. #1
    Advanced Member level 3
    Points: 4,946, Level: 16
    Achievements:
    7 years registered
    PA3040's Avatar
    Join Date
    Aug 2011
    Posts
    865
    Helped
    44 / 44
    Points
    4,946
    Level
    16

    Our MCU question paper

    Dear All
    Our exam paper asked following question
    1. Write 5 applications using Timer1
    2. Write 5 applications using Timer2
    3. Write 5 applications using Capture
    4. Write 5 applications using Compare
    5. Write 5 applications using PWM

    I could only answered to question number 5

    Please help for other and 5 too
    This is related to PIC mid range family MCU's

    Thanks in advance

    •   AltAdvertisement

        
       

  2. #2
    Full Member level 3
    Points: 2,179, Level: 10
    Achievements:
    7 years registered
    babar_ali's Avatar
    Join Date
    Dec 2010
    Location
    Friedrichshafen, Germany
    Posts
    150
    Helped
    37 / 37
    Points
    2,179
    Level
    10

    Re: Our MCU question paper

    Write 5 applications using Timer1

    1. Asynchronous Clock Mode (read AN580)
    2. Counter
    3. Control the operation of electrical devices based on a programmed schedule (Simplest application is LED Blinking)
    4. Delay (Timer Based)
    5. Digital Clock

    Write 5 applications using Timer 2
    1. Color Sensor (using TCS230)
    2. Delay (Timer Based)
    3. Sonar Range finding
    4. Triggering devices
    5. Counter

    Write 5 applications using Capture
    1. Pulse detection
    2. pulse width measurement (Square Wave)
    3. frequency counter
    4. One wire communication decoding
    5. Rotary Encoders / RPM monitoring

    Write 5 applications using Compare
    1. Device triggering like (SRF05)
    2. Special Event Trigger
    3. High to low and low to high transition
    4. Interrupt request without pin change

    Write 5 applications using PWM
    1. Speed Control (Motors)
    2. Switch mode Power supply
    3. Voltage regulation
    4. Audio effects and amplification
    5. Direct torque control
    6. Relay Control
    7. Generating an Analog Output (USING external RLC Components)

    Enjoy!


    1 members found this post helpful.

--[[ ]]--