Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

ESD (electrostatic discharge) and grounding

Status
Not open for further replies.

kilawea

Newbie level 1
Joined
Apr 25, 2013
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,287
Hello,

I am interested in understanding electrostatic discharges a little bit better. If I have a device over a metallic table, what will be the effect of having that table connected to ground or floating? Which of the two scenarios will reduce the risk of ESD damage the most? Is there actually a difference?
 

the metal table must be connect to 1~10 MOhm to ground.

Watch out for capacitance discharge. Discharge method can affect local effects. User needs to be wearing shoe straps on ESD flooring to also prevent charge buildup.

some devices such as GaAlAs and LEDs are rated for -5V reverse voltage breakdown. So ESD potential of 10 kV without protection must be attenuated to < 5V requires due diligence.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top