Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

how to do the gerber file fromexisting pcb board?

Status
Not open for further replies.

soodamanikannan

Member level 5
Joined
Jul 16, 2010
Messages
82
Helped
4
Reputation
8
Reaction score
4
Trophy points
1,288
Location
Coimbatore
Activity points
1,704
I had some own pcb's, unfortunatly my back system was bourn out. so that i haven't the final gerber files.
But still i had fabricated pcb boards. Please give the guidence for how to make the exact layout form existing pcb (or)
how to create the dxf file using pcb boards.

Thank in advance.
 

It will be difficult task.but u can chk the below link for reverse engineering..

**broken link removed**
 

You can find some one to copy the board, which will form the gerber files.

I had some own pcb's, unfortunatly my back system was bourn out. so that i haven't the final gerber files.
But still i had fabricated pcb boards. Please give the guidence for how to make the exact layout form existing pcb (or)
how to create the dxf file using pcb boards.

Thank in advance.
 

Company which produced the boards should have the gerber files or at least the films.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top