Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

MC33063 Buck Regulator Simulation using Cadence Orcad Capture+pSpice

Status
Not open for further replies.

elccomm

Newbie level 2
Joined
Oct 14, 2006
Messages
2
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,291
I have made a simulation for converting +12 DC to +5 volts using MC33063 from ONsemi; Cadence Orcad Capture generates the netlist well but pSpice calculations do not converge. Is there anyone to help the simulation converge, please? The whole project is attached.
 

Attachments

  • Buck MC33063.rar
    40.7 KB · Views: 101

Make sure in your schematic you are using the components with PSpice model attached.
 

Make sure in your schematic you are using the components with PSpice model attached.

There is no error indicating the library problems. My problem is on convergence and unacceptable results.

- - - Updated - - -
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top