Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Isolation transformer design

Status
Not open for further replies.
M

mnegm82

Junior Member level 2
Joined
May 30, 2004
Messages
21
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
Canada
Activity points
161
I need to know how to design an isolation output transformer for an electrosurgical device?
 

These transformers must pass stringent tests and be certified for this use. It may be less expensive to buy a ready made transformer that is already certified.

In general there are stringent leakage current and voltage breakdown requirements.
 

Here are some guidelines:
 

Here is a general overview. Not much detail though.
I recommend flatulent's suggestion, although shopping may be difficult. This RF transformer seems highly specialized.
 

where is the rest of the book "The Biomedical Engineering Handbook"

if i remember there was some discussion about uploading it here. what happened?
 

samcheetah said:
where is the rest of the book "The Biomedical Engineering Handbook"

if i remember there was some discussion about uploading it here. what happened?
Click to expand...
It's still too big despite my attempts to use several (deficient/broken) PDF image compression utilities.

Try eD2k. You want the 152MB version, not the 11MB versions.
 

you can find this book on rapid. You seach it as The Biomedical Engineering Handbook
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top