Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

wiring in D15 port of my DAQ

Status
Not open for further replies.
V

vamsee

Full Member level 1
Joined
Nov 6, 2012
Messages
95
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,288
Activity points
1,885
Hi all!!

I am using data acquisition, in which it has D25 as output and D15 port as input.. the D25 is connected to the PC thru the cabel.. I am using 3 pin hall sensor, the output of it should be connected to the pin8 of the D15.

Now my question, is tat possible to connect directly to the port... (inserting hall sensor output pin in the output port of the D15)??

IMG_4340.JPG

the attached pic shows the wiring of someother kind as I need the same way wiring.. how did they wired as shown in the pic?
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top