Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Data Path and Clock Path Depth in timing Path Report

Status
Not open for further replies.

mail4idle2

Full Member level 4
Joined
Oct 20, 2012
Messages
200
Helped
20
Reputation
40
Reaction score
19
Trophy points
1,298
Activity points
2,173
Please can somebody explain with example, Data Path and Clock Path Depth in timing Path Report.
 

Please can somebody explain with example, Data Path and Clock Path Depth in timing Path Report.

Can you be little more specific on what do you mean by depth here? Are you referring to the clock or data path from its source to the end point ?
 

Jeevan,

Yes I would like to see what is the Data/Clock Path depth from its start point to end point.
 

Jeevan,

Yes I would like to see what is the Data/Clock Path depth from its start point to end point.

You can use the timing report to get this info. If you are using PT , do "report_timing -path_type full_clock_expanded" to the desired start and end points. The report will show you the detailed clock path starting from the clock source and the data path as traced by the STA tool to time the path.
 
Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top