nagaraju.raju
Newbie level 5
I have a Physical board, i need to prepare schematic & layout file for physical board, the board has 4 layers (Top & Bottom, 2 Internal Plane layers).
Please suggest how to identify internal layers are plane layers or Signal layers.
Please suggest steps.
Please find below steps has i followed
1.>First i need to identify the components on the board[BOM is required].
2.>Refer the technical specs of the components find the Pin numbers, connections with the physical board.
3.>Prepare the schematics.
4.>Prepare the footprints.
5.>Generate the Netlist & import.
6.>Placement & routing.
7.>Gerber Verification & Release.
Please suggest how to identify internal layers are plane layers or Signal layers.
Please suggest steps.
Please find below steps has i followed
1.>First i need to identify the components on the board[BOM is required].
2.>Refer the technical specs of the components find the Pin numbers, connections with the physical board.
3.>Prepare the schematics.
4.>Prepare the footprints.
5.>Generate the Netlist & import.
6.>Placement & routing.
7.>Gerber Verification & Release.