Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

ESD protection with TVS diode array. What is this diode for?

Status
Not open for further replies.

kender

Advanced Member level 4
Joined
Jun 19, 2005
Messages
1,425
Helped
138
Reputation
276
Reaction score
39
Trophy points
1,328
Location
Stanford, SF Bay Peninsula, California, Earth, Sol
Activity points
10,035
Colleagues,

TVS diodes are used for ESD protection of signals, such as USB. One of the typical solutions consists of 2 diodes per line and one common Zener diode. Some app notes show additional diode anti-series with the Zener (highlighted with purple in the pictures). Not every application note shows it, though.

Unfortunately, I could find the explanation for it in the app notes themselves. What is this diode for :?:

Can this diode be detrimental? Suppose, a positive ESD pulse hits the GND, while the device is powered down. This extra diode becomes reverse-biased. The Zener doesn't conduct.

Any suggestion, insight or reference is really appreciated!

Cheers,
- Nick

fig.1
81_1345078277.png
(Source: **broken link removed**)

fig.2
82_1345078278.png
(Source: **broken link removed**)
 
Last edited:

Colleagues,

TVS diodes are used for ESD protection of signals, such as USB. One of the typical solutions consists of 2 diodes per line and one common Zener diode. Some app notes show additional diode anti-series with the Zener (highlighted with purple in the pictures). Not every application note shows it, though.

Unfortunately, I could find the explanation for it in the app notes themselves. What is this diode for :?:

Can this diode be detrimental? Suppose, a positive ESD pulse hits the GND, while the device is powered down. This extra diode becomes reverse-biased. The Zener doesn't conduct.

Any suggestion, insight or reference is really appreciated!

Cheers,
- Nick

fig.1
81_1345078277.png
(Source: **broken link removed**)

fig.2
82_1345078278.png
(Source: **broken link removed**)

It's for backdrive protection, more in the same TI note, page 9 ..
:wink:
IanP
 

Attachments

  • USB - BackDrvie Protection.JPG
    USB - BackDrvie Protection.JPG
    30.6 KB · Views: 325

It's for backdrive protection, more in the same TI note, page 9 ..
:wink:
IanP

Thanks, I understand the backdrive issue.

But, doesn't this diode leave the circuit vulnerable to negative ESD spikes (negative spike into VBus, or positive spike into GND) :?: Of course, more Zener can be added to protect against that too...
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top