abikutn
Newbie level 1
- Joined
- Dec 2, 2010
- Messages
- 1
- Helped
- 0
- Reputation
- 0
- Reaction score
- 0
- Trophy points
- 1,281
- Location
- In the heart of Texas
- Activity points
- 1,287
Hello ,
I am doing Image acquisition using Analog devices AD9643 Digitizer and HSC EVAL C Data Capture Board. I have 71 Khz low freq input square pulse ( +5 Volts and 0 volts TTL wave ) and clock square running at 100mhz.
When I get the waveform using the software I see it looks like it is not pure signal anymore , it has negative parts like AC. I dont understand as to why this is happening. can some one guide me here through this .
Thanks
Abhi
I am doing Image acquisition using Analog devices AD9643 Digitizer and HSC EVAL C Data Capture Board. I have 71 Khz low freq input square pulse ( +5 Volts and 0 volts TTL wave ) and clock square running at 100mhz.
When I get the waveform using the software I see it looks like it is not pure signal anymore , it has negative parts like AC. I dont understand as to why this is happening. can some one guide me here through this .
Thanks
Abhi