elpremo
Newbie level 1
hi, i am new member here & i hope to help me 
i want to write in mikroc program about Automatic washing Machine by :
1)waiting for the user to input the desired temp by up & down buttons and then press Enter button..
2)waiting for the user to input the desired no.of times by up&down buttons and then press Enter button..
3)open the inlet valve till the high level sensor ...
4)Turn on the heater till the desired Temp is reached ...
5)Getting the washing powder for 3 sec ..
.
6)Run the motor for the following sequence :
*Motor "forward"for 30 sec >>> Motor "off" for 2 sec >>>
*Motor "reverse" for 30 sec >>> Motor "off" for 2 sec ...
7)open the water outlet valve till the low level sensor ..
8)repeat the step #3 again..
9)repeat the step #6 again..
10)repeat the step #7 again ..
11)finally,turn on alarm buzzer for 5 times when finished ..
i want to write in mikroc program about Automatic washing Machine by :
1)waiting for the user to input the desired temp by up & down buttons and then press Enter button..
2)waiting for the user to input the desired no.of times by up&down buttons and then press Enter button..
3)open the inlet valve till the high level sensor ...
4)Turn on the heater till the desired Temp is reached ...
5)Getting the washing powder for 3 sec ..
.
6)Run the motor for the following sequence :
*Motor "forward"for 30 sec >>> Motor "off" for 2 sec >>>
*Motor "reverse" for 30 sec >>> Motor "off" for 2 sec ...
7)open the water outlet valve till the low level sensor ..
8)repeat the step #3 again..
9)repeat the step #6 again..
10)repeat the step #7 again ..
11)finally,turn on alarm buzzer for 5 times when finished ..
