Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Fiber IGBT HCPL316j gate driver

Status
Not open for further replies.

Vermes

Advanced Member level 4
Joined
Aug 2, 2011
Messages
1,163
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,316
Activity points
22,318


This driver can be used in high-power induction heater.



HCPL316j has two main advantages. First – examines the tension on the connector at saturation, second – regardless of the control input state it can disable the transistor in emergency situations, such as when the voltage on the connector at saturation exceeds 7V or when the control signal or supply voltage is not correct.



Security systems made of LEM CTs and the comparator that compares the signal value with the reference value, giving information to the microcontroller can be too slow. In described project, it is much faster.



A fiber optic input was implemented in the system in order to isolate from the microcontroller.

Link to original thread (useful attachment) – Światłowodowy sterownik bramek tranzystorów IGBT HCPL316j
 

Hi vermes,

would you please send me a schematic view of your IGBT gate driver by HCPL 316J you have upladed in Aug 2011. It seems interesting for me.

Thank you so much.
Farrokhiyan.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top