Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

VFD display module controlled by I2C

Status
Not open for further replies.
V

Vermes

Advanced Member level 4
Joined
Aug 2, 2011
Messages
1,163
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,316
Activity points
22,318


Elements used:
  • display NORITAKE FG1010RB1 - 10x1
  • driver MAX6934
  • driver MAX6851
The drivers need power 3,3V. The display needs 4,3V to glow and anode voltage 24V.
The driver due to its communication via I2C bus is easy to assemble in microprocessor systems. After right set up at the beginning of the program, sending data to the driver (displaying on the display) is very simple. There may be many applications.



Link to original thread (useful attachment) – Moduł wyświetlacza VFD ze sterowaniem przez I2C
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top