+ Post New Thread
Results 1 to 2 of 2
  1. #1
    Newbie level 4
    Points: 925, Level: 6

    Join Date
    Jan 2012
    Posts
    5
    Helped
    0 / 0
    Points
    925
    Level
    6

    ozone sensor interface electronics for radiosonde

    hai ,

    now i am decided to doing a new project.. actually it is a ozonesonde....in this project i want to measure current..it is a lower current in the range of 0-8 microamp...the current should be meaured using spi or i2c iterfaced ic's.. this ic should be interfaced to a mothercard..
    the the resolution should be one nanoamps...


    heeyy please suggest a good techniques for measuring lower current and ic...



    So, please suggest a smart way to do it, I appreciate every comments, links, schematics, etc.

    thxxx,
    sooraj sreedhar
    Last edited by sooraj sreedhar; 5th January 2012 at 08:06.

    •   AltAdvertisment

        
       

  2. #2
    Advanced Member level 3
    Points: 7,837, Level: 21
    milind.a.kulkarni's Avatar
    Join Date
    Oct 2011
    Location
    Bangalore
    Posts
    923
    Helped
    215 / 215
    Points
    7,837
    Level
    21
    Blog Entries
    1

    Re: lower current measurement techniques

    this kind of circuit need a interfacing with very high input impedance opamp....refer V to I convertor with (Mega ohm range base) and look for opamp CA3140 .....it have very high input impedance and very less leakage current may be you will able to measure the things....

    Good Luck
    Hope the post will be helpful to you....
    "Sharing is the best way of Learning"



--[[ ]]--