Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Problem with using lumped port in HFSS 9.1

Status
Not open for further replies.
M

markus

Junior Member level 1
Joined
May 26, 2004
Messages
16
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,283
Activity points
191
lumped port in HFSS 9.1

Hi!

I've tried lumped port excitation on microstrip and I'm wondering what kind of port face should I use. I've not found answer from hfss help.

Is that correct to define lumped port face heigth equal to thickness of the substrate and width equal to width of the microstrip? Or should I draw a bigger port face as one should do when using waveports?

Thank you for answers!

Markus
 

Re: lumped port in HFSS 9.1

Your settings for the dimensions of the lumped port are correct!
The bigger area is important ONLY when you assign a WavePort.
For the waveport, howewer, there are a lot of technical problems, only an experienced HFSS's user can handle correctly with a waveport.
Lumped port is easy and is a good way to feed an antenna or a DUT.
Sincerely
Sirac 8)
 
  • Like
Reactions: sohkha

    S

    sohkha

    Points: 2
    Helpful Answer Positive Rating
Re: lumped port in HFSS 9.1

Thank you for advice!

--
Markus
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top