Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

51 mcu bus to FPGA interface

Status
Not open for further replies.
D

davyzhu

Advanced Member level 1
Joined
May 23, 2004
Messages
494
Helped
5
Reputation
10
Reaction score
2
Trophy points
1,298
Location
oriental
Activity points
4,436
Hello all,

How about the 51 mcu bus to FPGA interface through P0 and P2 bus, I use the "register share" tech, but if the registers , the design must be complex, can you give me some suggestions on it?

Regards,

Davy Zhu
 

davyzhu said:
Hello all,

How about the 51 mcu bus to FPGA interface through P0 and P2 bus, I use the "register share" tech, but if the registers , the design must be complex, can you give me some suggestions on it?

Regards,

Davy Zhu
Click to expand...

Read the schematic of some KIT in xess.com, they use the mC like as 8031 to interface with FPGA. There are many examples.Good luck
 

What do u want to do exactly??

is your problem in the uc or in the FPGA

Can u give me more explanation
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top