Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

FreeRTOS and visual studio 2010 express

Status
Not open for further replies.
M

maqtech

Newbie level 4
Joined
Jul 17, 2009
Messages
7
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
morocco
Activity points
1,321
Hello ;


I have a problem with the simulation of FreeRTOS examples with watcom c/C++ , is there any one that he succeed the simulation with visual studio c++ 2010 express ? . please post steps & pictures if possible !.



Best regards.
 

FreeRTOS-A Free professional grade RTOS supporting 27 architectures, including ARM7, ARM9, Cortex-M3, RX600, MSP430, MSP430X, MicroBlaze, AVR, x86, PIC32, PIC24, dsPIC, H8S, HCS12 and 8051
Introduction
This page presents a Windows simulator port layer for FreeRTOS that has been developed and tested using both Visual Studio 2010 Express edition and the Eclipse IDE for C and C++ Developers with the MingW GCC based compiler. Demo projects are provided for both tool chains. Both tool chains are also free, although Visual Studio Express must be registered if it is to be used for anything other than evaluation purposes.
The port was developed on a dual core Intel processor running 32 bit Windows XP.
Visual Studio 2010 Express
The Visual Studio solution for the FreeRTOS simulator demo application is called WIN32.sln and is located in the FreeRTOS/Demo/WIN32-MSVN directory of the main FreeRTOS download.
 
thank you for your response ,

but I can't find the steps ( 1 , 2 , 3,...) to run examples ?

please help

best regards;
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top