Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

What is inrush current ?

Status
Not open for further replies.
P

phatcreators

Full Member level 5
Joined
Sep 2, 2011
Messages
315
Helped
24
Reputation
48
Reaction score
24
Trophy points
1,298
Activity points
3,458
What is inrush current ?

What is surge ? Is it a current ?

what is a surge suppressor ? Where & why it is used ?

thanks
 

I agree with Liteon. In additon sometimes inrush current is referred as the current requiered by a device when turned on or connected to power, this is mainly caused by capacitor charge. There are surge protection devices that reduce this peak current (Typically NTC resistors that have high resistance at startup and low resistance during normal operation NTC Applications).
 
The additional current required for devices during start up is most of the times greater than the rated operating current of them.One common application is motors or power inverters,even a light bulb, etc. A soft-start feature is not applicable in every application but it is meant to reduce the inrush current.
 
Also another form from inrush current can be from flux doubling in transformer primaries. This can happen both in SMPS transformers and 50/60Hz power transformers.
 
  • Like
Reactions: liteon

    liteon

    liteon

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top