Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
It provides both synchronous and asynchronous communication modes. It operates as a
Universal Asynchronous Receiver and Transmitter (UART) in three full-duplex modes
(Modes 1, 2 and 3). Asynchronous transmission and reception can occur simultaneously
and at different baud rates.
It is also receive-buffered, meaning it can commence reception of a second byte before
a previously received byte has been read from the receive register. (However, if the first
byte still hasn’t been read by the time reception of the second byte is complete, one of
the bytes will be lost). The serial port receive and transmit registers are both accessed
at Special Function Register SBUF. Writing to SBUF loads the transmit register, and
reading SBUF accesses a physically second receive register.
Salaam
It seems that it has a serial port like SPI wich could be programmed. (Like its mode) Or a USART with programmable specs lik baud rate, start bit, stop bit, parity ...