Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

can LNA for wlan 802.11g will work for 802.11n???

Status
Not open for further replies.

lna.fyp

Newbie level 6
Joined
Jun 4, 2011
Messages
13
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,366
hi everyone, i have designed a distributed LNA for 0.1G to 3G, with distributed topology, the gain is 8.2dB, s11=-13 s22=-7.5dB ( i will improve it) NF =4.1dB and IIP3= 3.02 and 1dB compression point= -8 so can anyone tell will this work for 802.11n with 2.4GHz band. 802.11n uses MIMO ( i dont knw much abt it) but it have mukltiple transmitters and receivers , so i needed to knw that will the LNA will get multi channel input , or all the channels are combined before feeding into LNA, i guess its a stupid question but i need to know =(( kindly reply guys
 

Both systems use OFDM modulation, so the LNA will work fine for both (when MIMO is not used in 802.11n).
For MIMO situation you need separate LNA's and receivers paths.
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top