Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

AT commands for reading sms

Status
Not open for further replies.
E

esweya

Newbie level 6
Joined
Jan 15, 2011
Messages
13
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
Dar es Salaam Tanzania
Activity points
1,386
Hi there! Am trying to read sms from the modem using at command, am using sunrom 1122 modem. Can someone assist me with the commands?
 

sunrom modem???? follow the AT commands, and try in hyperterminal first

AT+CMGS=1 reads sms stored in 1st location... change the number to read specific sms.
connect to pc and using hyper terminal software send the command to read the message.
 
  • Like
Reactions: esweya

    E

    esweya

    Points: 2
    Helpful Answer Positive Rating
thanks, the commands work well on the hyper terminal, the micro-controller responds well to the received message. But I still have one problem, i need to send a specific message to the microcontroller, i have tried some codes but the microcontroller responds to every received message.
 

clear explaination of what you have done with the commands, procedure or overview would help us understand your problem properly and give you a suitable advice or suggestion...
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top