+ Post New Thread
Results 1 to 4 of 4
  1. #1
    Newbie level 6
    Points: 402, Level: 4

    Join Date
    Jan 2011
    Location
    Dar es Salaam Tanzania
    Posts
    13
    Helped
    0 / 0
    Points
    402
    Level
    4

    AT commands for reading sms

    Hi there! Am trying to read sms from the modem using at command, am using sunrom 1122 modem. Can someone assist me with the commands?

    •   AltAdvertisement

        
       

  2. #2
    Advanced Member level 5
    Points: 33,613, Level: 44
    ckshivaram's Avatar
    Join Date
    Apr 2008
    Location
    villingen (Germany) / Bangalore
    Posts
    5,070
    Helped
    2158 / 2158
    Points
    33,613
    Level
    44
    Blog Entries
    1

    Re: AT commands for reading sms

    sunrom modem???? follow the AT commands, and try in hyperterminal first

    AT+CMGS=1 reads sms stored in 1st location... change the number to read specific sms.
    connect to pc and using hyper terminal software send the command to read the message.
    " It is so simple to be happy,
    but it is so difficult to be simple"


    1 members found this post helpful.

    •   AltAdvertisement

        
       

  3. #3
    Newbie level 6
    Points: 402, Level: 4

    Join Date
    Jan 2011
    Location
    Dar es Salaam Tanzania
    Posts
    13
    Helped
    0 / 0
    Points
    402
    Level
    4

    Re: AT commands for reading sms

    thanks, the commands work well on the hyper terminal, the micro-controller responds well to the received message. But I still have one problem, i need to send a specific message to the microcontroller, i have tried some codes but the microcontroller responds to every received message.



    •   AltAdvertisement

        
       

  4. #4
    Advanced Member level 5
    Points: 33,613, Level: 44
    ckshivaram's Avatar
    Join Date
    Apr 2008
    Location
    villingen (Germany) / Bangalore
    Posts
    5,070
    Helped
    2158 / 2158
    Points
    33,613
    Level
    44
    Blog Entries
    1

    Re: AT commands for reading sms

    clear explaination of what you have done with the commands, procedure or overview would help us understand your problem properly and give you a suitable advice or suggestion...
    " It is so simple to be happy,
    but it is so difficult to be simple"



--[[ ]]--