Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

the external clock output from pic PIC16F877

Status
Not open for further replies.

ammararm77

Newbie level 3
Joined
May 11, 2011
Messages
4
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,303
hi guys
i just want someone to help me to find out wich pin in the PIC 16f877a 44 pin can i connected to the ACLK of the ADC to generate external output clock.

Thanks
 

what about the CLKOUT pin? The one next the CLKIN where you commonly connect the crystal?

But the fact is... Do you need the same frequency for your adc??? Or do you need a lower frequency? If so, the best is to use the CCP module and one timer with a CCP pin... (if you need a higher freq, better use an external source)

First check your datasheet about all this info...
 

Don't ADCs use clock just for shift register?
In that case you just need the clock while loading the data?
 

hi but im talking about ACLK not SCLK i nees solution for ACLK
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top