+ Post New Thread
Results 1 to 5 of 5
  1. #1
    Newbie level 4
    Points: 306, Level: 3

    Join Date
    May 2011
    Posts
    5
    Helped
    0 / 0
    Points
    306
    Level
    3

    serial communication through uart

    how to give a text file through hyperterminal to viertex ml403


    i need code and ucf also

    pls any one can help me for thid

    •   AltAdvertisement

        
       

  2. #2
    Advanced Member level 5
    Points: 33,613, Level: 44
    ckshivaram's Avatar
    Join Date
    Apr 2008
    Location
    villingen (Germany) / Bangalore
    Posts
    5,070
    Helped
    2158 / 2158
    Points
    33,613
    Level
    44
    Blog Entries
    1

    Re: serial communication through uart

    in hyperterminal there is an option to called transfer. in that there is a option to send text file...

    select the text file and send it.... on the other end you need to store the incoming data in a suitable array of a good size.... for pc and board you need a max 232 IC connected to controller... and a serial cable....
    " It is so simple to be happy,
    but it is so difficult to be simple"



    •   AltAdvertisement

        
       

  3. #3
    Newbie level 4
    Points: 306, Level: 3

    Join Date
    May 2011
    Posts
    5
    Helped
    0 / 0
    Points
    306
    Level
    3

    Re: serial communication through uart

    thank you............

    actually we have loaded one program on to fpga
    for that i have to send input text file through hyper terminal
    but for communicating between uart port and fpga we have to write any code


    data is sending serial wise .program has to take 8 bits at a time and do some operation on that .then it will give 8 bit output that will take by hyper terminal.
    here we are sending pixels of a image in the form of text file.



    •   AltAdvertisement

        
       

  4. #4
    Full Member level 2
    Points: 3,146, Level: 13

    Join Date
    Jan 2004
    Posts
    148
    Helped
    69 / 69
    Points
    3,146
    Level
    13

    Re: serial communication through uart

    Have a look at this post, which includes code, testbenches, and a ucf file as well (UCF file for a memec spartan3 board):
    https://www.edaboard.com/thread156656.html



  5. #5
    Newbie level 4
    Points: 306, Level: 3

    Join Date
    May 2011
    Posts
    5
    Helped
    0 / 0
    Points
    306
    Level
    3

    Re: serial communication through uart

    in this post there is no code,no testbench etc...........
    pls can u check once



--[[ ]]--