+ Post New Thread
Results 1 to 3 of 3
  1. #1
    Member level 1
    Points: 1,176, Level: 7

    Join Date
    Apr 2009
    Posts
    41
    Helped
    0 / 0
    Points
    1,176
    Level
    7

    need help: EAGLE gerber data file extension

    hi,
    what are the file extensions of making EAGLE gerber data? (like top layer, bottom layer, top mask, bottom mask, drill etc.)

    thanks

    •   AltAdvertisement

        
       

  2. #2
    Super Moderator
    Points: 50,045, Level: 54
    Achievements:
    7 years registered
    keith1200rs's Avatar
    Join Date
    Oct 2009
    Location
    Yorkshire, UK
    Posts
    10,877
    Helped
    2075 / 2075
    Points
    50,045
    Level
    54

    Re: need help: EAGLE gerber data file extension

    You can use what you like, but if you load the standard CAM processor files then look at each of the layers you will see the extension for each layer e.g. .ly2 for "Inner layer 2":



    Keith
    I started life with nothing and I've still got most of it left. (Seasick Steve)


    2 members found this post helpful.

    •   AltAdvertisement

        
       

  3. #3
    Member level 1
    Points: 1,176, Level: 7

    Join Date
    Apr 2009
    Posts
    41
    Helped
    0 / 0
    Points
    1,176
    Level
    7

    Re: need help: EAGLE gerber data file extension

    already found it with the cam processor and eagle control panel help..

    ---------- Post added at 18:03 ---------- Previous post was at 18:01 ----------

    thanks for your reply keith



--[[ ]]--