Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

[SOLVED] ENVIRONMENTAL, EMI/EMC Tests Compliance

Status
Not open for further replies.

chandregowda

Full Member level 4
Joined
Jul 7, 2008
Messages
212
Helped
14
Reputation
28
Reaction score
4
Trophy points
1,298
Location
Bengaluru/Bangalore, India
Activity points
2,564
Hi,

we are developing one Transceiver Unit with UP and Down Conversion units (10 Channels).
There are about 18 Submodules that will be fixed in one 19 inches Rack mount unit. height of the 19 inch rack is 3U size (135mm Approx) and length of the unit is 400mm.

what are issues to be taken care to meet these tests?

Mainly
1. Vibration (Sinusoidal) Resonance search and Endurance- MIL STD -810C Method 516.2 Proc.1 15G, 11 msec, 1/2 sine

2. Bump Test: 15G Max

3. Temperature Cycling: -10 o C to +55 o C

4. EMI/ EMC - MIL STD- 461C (Tests: CE 03, CE 06, CS01, CS02, CS06, RE02, RE03, RS03 )

 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top