Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Laying out multichannel PCB in Altium

Status
Not open for further replies.
K

kender

Advanced Member level 4
Joined
Jun 19, 2005
Messages
1,425
Helped
138
Reputation
276
Reaction score
39
Trophy points
1,328
Location
Stanford, SF Bay Peninsula, California, Earth, Sol
Activity points
10,035
Colleagues,

I’m starting with Altium Designer 9, and I have to make a board that has 8 identical analog channels. Hierarchical schematic worked great: I’ve drawn the design one time and instantiated it 8 times. Is it possible to do the same with PCB layout (without routing the same pattern 8 times)?

Any suggestion, insight or reference is really appreciated!

- Nick
 

Yes, when you start PCB layout, each channel will be placed in its own "room". You lay out one of the rooms, then copy the room format (Design -> Rooms -> Copy Room Formats) to the other rooms. Be aware that if you start making changes to individual rooms so that they aren't all the same, you can get to the point where re-copying doesn't work so well, and you have to make subsequent changes a room at a time.
 
  • Like
Reactions: kender

    K

    kender

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top